Corner Radius End Mill

Betalent carbide corner radius end mills are made of high-quality carbide rods and designed by professional end mill designers with reasonable blade angle, blade shape, number of flutes, and chip groove. And all these type end mills are ground by imported Walter 5 axils grinding machine in order to get high enough precision level. Then a special passivating treatment and proper coating are done to the finished end mills to make the end mill tougher and longer lifetime.

There are four carbide grades applied to general flat end mills:

BT45, for milling materials of which hardness range from HRC45degree to HRC48degree, workpiece categories P, K, and softer stainless steel under M group in ISO classification.

BT50, for HRC50 to HRC53degree, mainly for M, N, and K group workpiece.

BT55, for HRC55 to HRC58degree, for S, M, and K workpiece.

BT60, for HRC 60 to 65degree, for milling quenched materials (HRC65 about), hardwood, and finish milling of SUS 316L stainless steel, most workpiece under ISO category H.

Corner Radius End Mill List

	D Cutting Dia.(mm)	D Shank Dia.(mm)	Lc Cutting length(mm)	L Overall length(mm)
2 Flute, 1 Mm Corner Radius End Mil,l Mill Cutter	1mm	4mm	3mm	50mm
2 Flute, 2 Mm Corner Radius End Mill, Mill Cutter	2mm	4mm	6mm	50mm
2 Flute, 3Mm Corner Radius End Mill, Mill Cutter	3mm	4mm	9mm	50mm
2 Flute, 4Mm Corner Radius End Mill, Mill Cutter	4mm	4mm	11mm	50mm
2 Flute, 5mm Corner Radius End Mill, Mill Cutter	5mm	6mm	13mm	50mm
2 Flute, 6mm Corner Radius End Mill, Mill Cutter	6mm	6mm	16mm	50mm
2 Flute, 8mm Corner Radius End Mill, Mill Cutter	8mm	8mm	20mm	60mm
2 Flute, 10mm Corner Radius End Mill, Mill Cutter	10mm	10mm	25mm	75mm
2 Flute, 12mm Corner Radius End Mill, Mill Cutter	12mm	12mm	30mm	75mm
2 Flute, 16mm Corner Radius End Mill, Mill Cutter	16mm	16mm	36mm	100mm
3 Flute, 1 Mm Corner Radius End Mill, Mill Cutter	1mm	4mm	3mm	50mm
3 Flute, 2 Mm Corner Radius End Mill, Mill Cutter	2mm	4mm	6mm	50mm
3 Flute, 3mm Corner Radius End Mill, Mill Cutter	3mm	4mm	9mm	50mm
3 Flute, 4mm Corner Radius End Mill, Mill Cutter	4mm	4mm	11mm	50mm
3 Flute, 5mm Corner Radius End Mill, Mill Cutter	5mm	6mm	13mm	50mm
3 Flute, 6mm Corner Radius End Mill, Mill Cutter	6mm	6mm	16mm	50mm
3 Flute, 8mm Corner Radius End Mill, Mill Cutter	8mm	8mm	20mm	60mm
3 Flute, 10mm Corner Radius End Mill, Mill Cutter	10mm	10mm	25mm	75mm
3 Flute, 12mm Corner Radius End Mill, Mill Cutter	12mm	12mm	30mm	75mm
3 Flute, 14mm Corner Radius End Mill, Mill Cutter	14mm	14mm	36mm	100mm
3 Flute, 16mm Corner Radius End Mill, Mill Cutter	16mm	16mm	36mm	100mm
3 Flute, 18mm Corner Radius End Mill, Mill Cutter	18mm	18mm	45mm	100mm
3 Flute, 20mm Corner Radius End Mill, Mill Cutter	18mm	18mm	45mm	100mm
4 Flute, 2 Mm Corner Radius End Mill, Mill Cutter	2mm	4mm	6mm	50mm
4 Flute, 3mm Corner Radius End Mill, Mill Cutter	3mm	4mm	9mm	50mm
4 Flute, 4mm Corner Radius End Mill, Mill Cutter	4mm	4mm	11mm	50mm
4 Flute, 5mm Corner Radius End Mill, Mill Cutter	5mm	6mm	13mm	50mm
4 Flute, 6mm Corner Radius End Mill, Mill Cutter	6mm	6mm	16mm	50mm
4 Flute, 8mm Corner Radius End Mill, Mill Cutter	8mm	8mm	20mm	60mm
4 Flute, 10mm Corner Radius End Mill, Mill Cutter	10mm	10mm	25mm	75mm
4 Flute, 12mm Corner Radius End Mill, Mill Cutter	12mm	12mm	30mm	75mm
4 Flute, 16mm Corner Radius End Mill, Mill Cutter	16mm	16mm	36mm	100mm
6 Flute, 6mm Corner Radius End Mill, Mill Cutter	6mm	6mm	16mm	50mm
6 Flute, 8mm Corner Radius End Mill, Mill Cutter	8mm	8mm	20mm	60mm
6 Flute, 10mm Corner Radius End Mill, Mill Cutter	10mm	10mm	25mm	75mm
6 Flute, 12mm Corner Radius End Mill, mill Cutter	12mm	12mm	30mm	75mm
6 Flute, 16mm Corner Radius End Mill, Mill Cutter	16mm	16mm	36mm	100mm

Relate Corner Radius End Mill Products

Roughing End Mill

Chamfering End Mill

Taper End Mill